3
Installation Instructions
1.
Screw each of the poles (C) and the fixture (B)
together tightly
(Fig. 2).
2.
Attach the stake (D) to the unit by twisting it on to
the bottom pole
(Fig. 2).
3.
Insert the stake into the ground, make sure you have
turned the lamp to the ON position (either
I
or
II
mode)
Replacing the Battery
After several years of use, the battery may need replacing.
1.
Remove the top of the lamp off by turning it counter clockwise and lifting it off.
2.
Remove the 3 screws from the top of the lamp and remove the top from the fixture
(Fig. 3)
.
3.
Remove the screws from the LED dome on the underside of the top
(Fig. 4)
.
4.
Take the battery out of its secured position and unclip its wire
(Fig. 5)
.
5.
Clip your new battery in and reinstall the lamp in reverse order.
6.
This solar garden light takes a Li-Ion 3.2V/800 mAh battery pack. Batteries can be
purchased through our authorized dealers or by going to
Replacement batteries are available at
our Toll-free number: +1-800-835-4113
Fig. 2
