Assembly Instructions
Operation Instructions
(follow these instructions for each lamp head)
Replacement Parts
page 3
• Using the provided template, mark and drill three holes into
concrete no larger than the provided anchors.
• Place the anchors into the holes with the threaded ends
facing up.
• Place the base pole (H) over the
anchors and secure using a wrench.
Cover the nuts with the provided
plastic covers.
• Make sure you remove the spacer pole
(E) from the inside of the middle pole
(G).
• Place the middle pole (G) over the
base pole (H) and secure using the
provided screws.
• Attach the top pole (F) to the middle
pole (G), and the spacer pole (E) to
the top pole (F) by twisting the poles
clockwise.
• Attach the finial cap (D) to the
centerpiece (C) and secure with the
four screws.
• Attach the centerpiece (C) to the spacer
pole (E) by twisting clockwise.
• Install the GS Solar LED Bulb into the top.
• Move the operation switch to your
desired setting.
• Attach the top (A) to the fixture (B) and
secure using the two phillips head screws.
• Attach the lamp head to the centerpiece
(C) by twisting clockwise.
• Repeat this for the second lamp head.
• Insert the GS Solar LED Bulb into the top (A) by twisting
clockwise.
• Move the operation switch to the Low or High position
according to your preferences:
- Low = Softer light and longer duration
- High = Brighter light output
• The solar Lamp will automatically operate at dusk
Replacement Batteries and Bulbs are available at
www.gamasonic.com
or via our Toll Free number:
+1-800-835-4113.
Your Lamp can use the following bulbs:
C37WW10W – included bulb with Warm White LEDs (2700K)
C37BW10W – bulb with Bright White LEDs (6000K)
F30WW05W – included Flame bulb with simulated flame LEDs
T45WW10W – Edison LED Bulb with Warm White LEDs (2700k)
Your lamp uses two of the following battery:
GS32V30
