Operation Instructions
Installation Instructions
Turn the operation switch to the I (Warm White) or II (Bright White) position,
and the solar garden light will automatically operate from dusk to dawn at your
chosen color temperature.
1.
Screw each of the poles (C) and the fixture (B) together tightly.
2.
Attach the stake (D) to the unit by twisting it on to the bottom pole.
3.
Insert the stake into the ground, make sure you have turned the
lamp to the ON position (either I or II mode).
I - Warm White
O - OFF
II - Bright White
page 3
Replacing the Batteries
After several years of use, the batteries may need replacing.
1.
Remove the fixture from the pole by twisting it counter clockwise.
2.
Remove the 3 screws from the top of the lamp and remove
the top from the fixture.
3.
Remove the three screws along the perimeter of the silver
reflector on the underside of the top.
4.
Take the battery out of its secured position and unclip its wire.
5.
Clip your new battery in and reinstall the lamp in reverse order.
6.
This solar garden light takes a Li-Ion 3.2V/1000 mAh battery pack - item #GS32V10
Replacement batteries are available at
www.gamasonic.com or via our Toll free number: +1-800-835-4113