page 5
2. Mounting with solar panel facing the opposite direction as the lamp.
a. Insert Part A into the groove at the bottom of Part F with the
tapered end of the wedge going into the lamp
(Fig.9). NOTE:
Push the part into the groove firmly so it does not easily slide out
and tighten set screw.
(Fig.10)
b. Attach Part A to Part C and secure with screw cap (Part H).
(Fig. 11)
c. Insert Part C into the groove at the top of Part G with the tapered end
of the wedge going into the panel
(Fig. 8). NOTE:
Push the part into
the groove firmly so it does not easily slide out and tighten set screw.
d. You can adjust the angle of the completed assembly by loosening
the screw (Part H) and tilting the product to the desired angle. Re-
tighten Part H to secure product in the new position.
e. Connect the solar panel and the lamp head cords together and
secure using the screw connector.
(Fig. 11)
Fig. 11
Fig. 9
Fig. 10
Operation Instructions
1. Connect the wire from the solar panel to the lamp and secure with the
threaded cap on the wire.
NOTE
: an extension cable is included (Part I)
for use when the solar panel is mounted separately from the lamp.
2. Turn the external operation switch to the
Low or High position
(Fig 12). according to your preferences:
a.
Low:
For softer light and longer duration.
b.
High:
For brighter light output.
3. The solar lamp will automatically operate at dusk.
Operation Switch
Fig. 12
