page 4
7. Connect the solar panel and the lamp head
cords together and secure using the screw
connector. An extension cord is included and
can be used to mount the solar panel further
away from the lamp.
(Fig. 4)
Fig. 4
Step 2. Mounting Solar Panel to Lamp
This product has the option of mounting the solar panel directly to the lamp in either a forward or rear
facing direction. Please follow the below steps if you desire the panel to be attached to the lamp.
1. Mounting with solar panel facing the same direction as the lamp.
a. Insert Part C into the groove at the bottom of Part F with the
tapered end of the wedge going into the panel (
Fig.5
&
Fig. 6
).
NOTE:
Push the part into the groove firmly so it does not easily slide
out and tighten set screw.
b. Attach Part B to Part C
(Fig. 7)
and secure with screw cap (Part H).
c. Insert Part B into the groove at the top of Part G
(Fig. 8)
with the
tapered end of the wedge going into the lamp.
NOTE:
Push the part
into the groove firmly so it does not easily slide out and tighten
set screw.
d. You can adjust the angle of the completed assembly by loosening
the screw (Part H) and tilting the product to the desired angle. Re-
tighten Part H to secure product in the new position.
e. Connect the solar panel and the lamp head cords together and
secure using the screw connector.
(Fig. 8)
Fig. 8
Fig. 5
Fig. 6
Fig. 7
