Acquaer Ltd.
H-4900, Fehérgyarmat Szatmári út 11.
CUTTING WITH A BLADE
C
C
U
U
T
T
T
T
I
I
N
N
G
G
W
W
I
I
T
T
H
H
A
A
B
B
L
L
A
A
D
D
E
E
3-tooth metal blade is provided with the machine
The metal blade
is used for cutting brush
and weeds up to 3/4” in diameter.
Use of saw blade with this machine is prohibited.
CUTTING WITH A BLADE
S
S
C
C
Y
Y
T
T
H
H
I
I
N
N
G
G
W
W
E
E
E
E
D
D
S
S
.
.
This is cutting by swinging the blade in a level arc. It can quickly clear
areas of field grass and weeds. Scything should not be used to cut large, tough weeds or woody
growths.
N
N
O
O
T
T
E
E
Do not use a brush blade to cut trees which
exceed a diameter of 1/2 to 3/4 inches.
Scything can be done in both directions, or just in one way which results in the debris
WARNING
DANGER
Do not cut with dull, cracked or damaged
meal blade.
Before
cutting
growth,
inspect
for
obstructions such as boulders, metal stakes
or strands of wire from broken fences. If
an obstruction can not be removed, mark
its location so that you can avoid it with
the blade. Rocks and metal will dull or
damage a blade. Wire can catch on the
blade head and flap around or be thrown
into the air.
WARNING
DANGER
DO NOT USE A BRUSH CUTTER
FOR CUTTING TREES.
WARNING
DANGER
Use the shoulder harness at all times
adjust both harness and harness clamp
on the unit so that the unit hangs a few
inches above ground level .The cutting
head and the metal debris shield should
be level in all directions. Harness the
unit on the right side of your body.
