Acquaer Ltd.
H-4900, Fehérgyarmat Szatmári út 11.
DESCRIPTION
SAFETY MANUAL included with unit. Read before operating and keep for
future reference to learn proper, safe operating techniques.
1.
BLADE 3-tooth blade for grass, weed or brush cutting applications.
Harness and metal shield are required for blade operation.
2.
NYLON CUTTER HEAD Contains replaceable nylon trimming line that
advances when the trimmer head is tapped against the ground while the
head is turning at normal operating speed.
3.
DEBRIS SHIELD Mounted just above the cutting attachment. Helps
protest operator by deflecting debris produced during the trimming
operation. Do not operate unit without shield.
4.
CUT-OFF KNIFE Trims nylon filament to the correct length-7״, head to
end of line-when nylon trimming head is bumped on the ground during
operation, line advance. If trimmer is operated without a cut-off knife the
line becomes too long the engine, this will overheat or damage the
engine.
5.
DRIVE SHAFT ASSEMBLY Contains a specially designed liner flexible
drive shaft.
6.
IGNITION SWITCH “slide switch” mounted on top of the Throttle
Trigger Housing. Move switch FORWARD to Run, BACK TO STOP.
7.
SAFETY LEVER Before acceleration, compress it please.
