Version 1, 1 May 2020, Page
3
of
5
Version 1,30
th
April 2020, Page
3
of
5
3. Secure bottle filler and connect water
Fit cup washer and nut.
Tighten assembly ensuring it cannot be
turned once installed.
Connect water inlet. Thread tape/sealant
should be used. Ensure the thread tape
doesn’t obscure the inlet opening.
4. Remove spout
Remove spout from assembly as shown.
The spout can be rotated to 4 different positions
to suit installation.
5. Fit & position spout
Position the spout in the desired position
ensuring the position hole lines up with the
grub screw as shown.
Ensure supplied O-Ring is fitted to the filler
inlet.
Insert the filler assembly into the outlet.
Note: We recommend a small amount of an
approved silicone grease is used on the o-ring
before assembly to ensure ease of fitment.
6. Secure spout
Once positioned and the alignment is correct
(see above), tighten the grub screw to secure
the outlet.
Align
Water Inlet