Version 3, 7 May 2020, Page
2
of
4
Version 1,14
th
April 2020, 2 of 4
DIMENSIONS
INSTALLATION
INSTALLATION COMPLIANCE: Galvin Engineering products must be installed in accordance with these
installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements.
Water and/or electrical supply conditions must also comply to the applicable national and/or state standards.
Failing to comply with these provisions shall void the product warranty and may affect the performance of the
product.
1. Remove Handle
Remove the indicator button as shown.
Using a hex key, remove the grub screw.
2. Remove Handle & Flange
Remove the handle.
Carefully remove flange from the mixer
assembly.
Care should be taken to avoid scratching the
mixer body.
Rough-in Dimensions
Indicator Button