Version 1, 14
th
April 2020, Page
4
of
5
REMOVE & INSPECT FLOW REGULATING AERATOR
1. Remove Flow Regulating Aerator Housing
Using the supplied tool (pictured) remove the
flow regulating aerator housing as shown.
Ensure the flats on the outlet line up with the
flats on the tool and turn anti-clockwise.
2. Remove & Inspect
Remove the housing and flow regulating
aerator.
Inspect for debris and clean. Replace if
necessary.
3.
Reassemble
Reverse steps 2 & 1 to reassemble ensuring correct orientation.
Test for leaks and correct operation
TROUBLESHOOTING
PROBLEM
CAUSE
RECTIFICATION
Tap is leaking
Headworks are worn or
damaged
Remove and inspect the headworks,
remove debris and/or replace parts if
damaged
Tap incorrectly installed
Follow the installation steps above when
fitting the tap.
Tap has inconsistent flow
Blocked flow regulating aerator
Follow the instructions above to remove
flow regulating aerator from the body and
check for debris. Install an inline strainer
to stop further blockages.
Tap moves on basin
Insufficiently tightened
Follow the steps above in relation to
tightening the installation.
Water temperature is opposite to
the handle markings
Inlet hoses connected
incorrectly
Connect the inlet hoses to the correct
inlets as shown above.
Supplied Tool
Flow Regulating
Aerator
