© Copyright
Gallo Technologies
. All Right Reserved
- 6 -
Rev. V8.2- 20212
To Start / Stop Engine.
To Start Engine:
While pressing the brake/clutch peddle, Press
“PUSH START STOP”
button and hold
until the engine starts. IGN 1 will turn ON, the starter will engage and the engine will start. After the
engine has started, release the “
PUSH START STOP”
button, ACC, IGN1 and IGN2 will turn ON.
To Stop Engine:
press “
PUSH START STOP”
button for 1.5 sec. IGN 1 and IGN 2 will turn OFF and the
engine will stop. ACC will remain ON until (a.) the “
PUSH START STOP”
button is pressed one time, or,
(b.) the key FOB is moved out side the vehicle and is out of range.
GTStarter-2
has numerous user configurable features that can be enabled or modified according to user’s
preferences. This section explains each of the user configurable functions. See Sec. 1.5 “
Programming Function
Set-Up Options”
for details on how to modify configurable features.
Valet Mode
: In DISARM mode, Pressing valet switch for over 5 seconds will activate valet mode. Siren will chirp 2
times and the green LED will stay ON.
To deactivate valet mode (normal status), press the valet switch for over 5 seconds. The siren will chirp one time
and the green LED will flash slowly.
In Valet mode all alarm function will be disabled. The key FOB buttons can lock and unlock doors, but not the trunk.
“Push Start Stop”
button functions will continue as in Normal status. If the key FOB is in range, the vehicle can be
started with the
“Push Start Stop”
button or the ignition key, if an ignition key switch is also used.
Transmitter (Key FOB) Code learning:
The Key FOBs have been matched to the control module at the factory. If
additional key FOBs are used they must first be learned to the Control Module before they will function.
1. Automatic Door Lock / Unlock Function:
Enabled (default):
When the key FOB is within range, the doors unlock automatically and the system enters Disarm
mode, the lights flash twice , siren chirps twice (by short tone) (if Silent arm/disarm function is set to OFF). The
“Push Start Stop”
is activated when the door is opened, and the green LED flashes.
When the key FOB is out of range, the doors lock automatically and the system enters the Arm mode. The lamps
flash once, siren chirps once by short tone, (if Silent arm/disarm function is set to OFF). The
“Push Start Stop”
button is disabled and the blue LED flashes.
OFF
Ign1 ON
Starter
Engaged
Press and hold button
While pressing foot
brake or clutch peddle
Press button for 1.5 Sec
No brake or clutch required
IGN1, IGN2 will turn OFF & ACC will
stay ON
.
Release after engine
start ING2 & ACC
will turn ON
Engine running
Ign1, IGN2 & ACC
ON
1.4 GTStarter-2 FUNCTION OPTIONS
