Gallien-Krueger MB200, Руководство пользователя

Страница: 7 / 10

7
MB SERIES
Sound Tips
The MB Series has several unique features which,
if used properly, will obtain the sound you have
been searching for.
The Equalizer:
The equalizer is used to fine tune your sound.
When adjusting making adjustments, do it just a
little at a time. These are active circuits and small
changes can make a big difference in your sound.
With a little experimentation you will find that this
equalizer is very easy to use and provides you with
a large variety of great sounds unique to GK.
Contour:
Increasing the Contour level will scoop out
midrange frequencies while boosting the highs
and lows. The sound, once again, is unique to GK
and available on any other Bass amp. Lower
contour settings are recommended for midrange
clarity at higher playing levels.
Direct Out:
The MB Series provides a low noise, high quality
balanced direct output for connection to PA and
recording consoles. A ground lift switch is
included to remove hum and buzz when
connecting to equipment powered by a different
ground system.
With the pre/post EQ switch set to “pre” (out), the
direct output signal is fed directly from the input
stage providing a low noise output superior to
external direct boxes and impedance transformers.
In the "pre" position, the direct output signal is
only effected by the Input Volume, -10db pad and
mute. This allows you to adjust your tone and
volume on stage without changing the direct
output signal level and confusing your sound man.
Changing the pre/post EQ switch to “post” (in),
sends the "GK sound" (EQ settings etc.) and
preamp response to the direct out jack. This gives
you complete control over the direct out’s tone and
volume.