REMOVABLE
COVER
TFC
MEMBRANE
STANDARD SYSTEMS
USE 65 GPD MEMBRANE
CERTAIN APPLICATIONS
MAY USE
A DIFFERENT CONFIGURATION
CARBON BLOCK
POST 55710G2
65 GPM FCM
TMEMBRANE
5709G2
CARBON PRE FILTER
55706G2 SED /CARBON
ELEGANT PLASTIC MOLDED COVER
INCLUDED NOT SHOWN
GALLEY-MATE
FAUCET AND SYSTEM COMPONENTS
PARTS BREAKDOWN
Standard Faucet Assembly
Each Galley-Mate Reverse Osmosis System is packed
with a long reach polished chrome faucet. The instruc-
tions shown below will cover most variations of the
Standard Faucet, which is available in decorator colors,
polished brass, gold plated, and brushed antique finishes.
Were you to have specified a special decorator faucet,
mounting would be the same.
Yacht-Mate Products in addition, offers several lines of
specialty faucets, such as the handsome OPELLA Line.
In some cases, the hole size for mounting specialty fau-
cets as well as the connecting assemblies may differ.
If you have ordered a specialty faucet from our distribu-
tor, please refer to the installation instructions included
with the alternate faucet, before you locate and drill any
holes for mounting.
NOTE:
For certain ice line applications, the ice line is provided
in 1/4” copper coil tubing. Cut /reduce length of 1/4”
copper to feed with 3/8” tubing (leaving enough to pull
out fridge) .When adapting plastic to copper, use a brass
compression fitting to adapt either 3/8” or 1/4” plastic
tube to 1/4” copper, using a 1/4 X 1/4 union or a 3/8 X
1/4 reducing union in brass, with plastic ferrules and
plastic tube inserts on the plastic tube, brass ferrules on
the copper tube.
5
Short Spout, Gooseneck, or Long
Reach Faucet Spout
Faucet Water Actuator
Faucet Body and Actuator Valve
Escutcheon Plate
Black Rubber Washer
Black Locating Washer
Fastening Nut
Galley or Head Vanity
Counter Top
Lock Washer
John Guest
™
Female X 3/8” Tubing
Quick Connect Plastic Fitting
3/8” FDA Pure Water Tubing
