EN - 23
EN
III. INSTRUCTIONS FOR USE
Assembling of unit
(see Fig. 1)
Take all parts out of the box and remove all packing material.
1) Unscrew the base nut
P9
from the bottom part of the fan body
P1
.
2) Assemble the base
P8
and screw it together by screws
P10
.
3) Put the base
P8
on the bottom part of the fan body
P1
and fix it by tightening the nut
P9
. The power cord must be in groove
P11
Note:
Apply reverse procedure to disassemble the unit.
Control
Plug the assembled fan into wall socket.
Turn on the fan by pressing one of the four buttons on the fan base
P4
.
First button switches the fan off. Description of buttons:
Button (3)
– High air flow velocity
Button (2)
– Medium air flow velocity
Button (1)
– Low air flow velocity
Button (0)
– Off
Oscillation
Oscillation is controlled by the switch
P6
in the following positions:
Position „I“
– oscillation on
Position „0“
– oscillation off
Timer
The operation time is adjustable from 0 to 120 min. by the timer rotary regulator
P5
. Once
the rotary regulator reaches the position „
OFF
“ (after the set time expires), the fan will
automatically switch off.
Note:
If you want the fan to operate non-stop (with no time limit), set the rotary regulator
P5
to
the position „
ON
“.
IV. MAINTENANCE
Unplug the unit before cleaning or storing. Wipe the unit with an absorbent tissue, paper
towel or soft cloth. Never use an abrasive to clean the appliance. Do not immerse the
appliance or the cord in water or any other liquid.
V. TROUBLESHOOTING
The device is not working
•
Check that the mains connection cable is firmly plugged in.
•
Check the right function of outlet. Test outlet with other electrical appliances.
•
Check the supply cord to ensure no damaged is evident.
Содержание VEN 29T
Страница 36: ......
