Gallet PEP 906, Инструкция по эксплуатации

Страница: 14 / 20

ENG - 14
Operation
1. Put the scale on a hard and flat surface
(avoid carpet or soft surface).
2. Gently step on the scale, then the scale
will be automatically turned on. Stand
evenly on the scale without moving and
wait until your weight shown on display
is stable and locked.
Step off the scale when „0.0“ appear you can measure again.
Automatic switch off
When you step off the scale, it will automatically switch off. Auto shut-off occurs if display shows
„0.0“ or shows the same weight reading for approximate 8 seconds..
Note:
If the scale was moved to new place, it may cause some error for he first times.
Troubleshooting
Error and other LCD message
LCD may show occasionally error message. Simply turn off the unit for a brief moment, or
remove and re-install battery as a total re-set. Then turn on again to resume operation.
If, when you tap the scale to activate it, there is no display at all or „LO“ is displayed- try two
new batteries.