Gallet PEP 257, Инструкция по эксплуатации

Страница: 31 / 52

ENG - 31
ENG
Insert the Batteries
• Open the battery door in the back of the scale.
• Insert the batteries (4 x 1.5V AAA) into the battery compartment according to the
polarity indications marked inside the compartment.
* The digits “88888” will be shown on the LCD.
• Close the battery door and wait until the digits “0.0kg” are shown on the LCD.
CAUTION
• When the symbol appears, the device will power off in four seconds. Then you shall replace
with a new set of batteries. Please replace all four batteries in the same time. Do NOT mix the
old batteries with the new one.
• Worn batteries are hazardous waste. Do NOT dispose of them together with the household
garbage. Please refer to the local ordinances and recycling instructions regarding disposal of
the worn batteries.
Set Up Your Profile
The glass body fat analyzer supports multiple users (Up to Four). You may follow below
instructions to assign User ID and set up your own profile, including Gender, Stature, and Age.
1. Assigning User ID
• With batteries correctly installed, press “ SET ” key to enter setting.
• The system will request User ID selection first. As pictured below, “P1” blinks.
The operator may press the function key or to select User ID among
P1, P2, P3 and P4.
• Press “
SET
” key to confirm User ID.
2. Setting Gender
• After confirming User ID, the system will divert to Gender setting automatically.
• As pictured below, the portrait
blinks. The operator may press the function key
or or to select Gender and Status.
• Press “ SET ” key to confirm User ID.
3. Setting Stature
• After confirming Gender, the system will divert to Stature setting automatically.
• As pictured below, the digits “160” blinks. The operator may press the function key
or to increase or decrease the numeral. (Range: 100 cm to 220 cm).
• You may press and hold the function key or for fast changing the numeral.
• Press “ SET ” key to confirm stature.