Gallet ASP 612, Инструкция по эксплуатации

Страница: 24 / 40

II. EQUIPMENT AND AccEssOrIEs (Fig. 1)
A – vacuum cleaner
A1 – ON/OFF switch A5 – dust bin
A2 – dust bin arrest A6 – filter protector
A3 – hand cleaner arrest button A7 – HEPA filter
A4 – handle
b – rod vacuum cleaner body
B1 – handle
c – swivel connector
D – floor nozzle
E – accessory
E1 – short slit nozzle E2 – brush
III. VAcUUM cLEANEr PrEPArATION
Remove all packing material, take out the vacuum cleaner and the accessories. Remove
all possible adhesion foils, stick–on labels or paper from the appliance.
Fixing vacuum cleaner into adapter
Put vacuum cleaner A to cleaner body B with the suction vent and then tilt the vacuum
cleaner to the aperture to the maximum position (you will hear a snapping sound). After
taking the vacuum cleaner from the body you have to push lock button A3 and then to pull
the vacuum cleaner out (Fig. 2).
Floor nozzle
Slide the nozzle D into the vacuum cleaner body b all the way (you’ll hear an audible clack).
Assembling handle
Connect the handle into the cleaner body,insert and tighten the screw.
slit nozzles, brush
Slide the selected accessory E all the way into the opening in the dust bin A5 . Take the
attachment off reversely. The accessory can be used only with this vacuum cleaner.
IV. UsE OF VAcUUM cLEANEr
According to the selected cleaning activity, use either the vacuum cleaner alone and
select accessory E or assemble the vacuum cleaner with an extension adapter and select
accessory D . The floor nozzle D is intended for vacuuming carpets with low pile or smooth
flooring. If the floor nozzle is fitted with a brush, pull it out by switching over a flap when
vacuuming hard floorings. You can use crevice nozzle E1, for vacuuming places that are
hard to access. In case of using the cleaner A without the body of the rod cleaner b , turn it
on/off by switching the switch A1 .
24 / 29