Gallagher W-0, Быстрый старт

Страница: 9 / 64

9
Gallagher W- Weigh Scale Quick Start Guide
English
Weighing animals
1. Load the fi rst animal onto the pla orm. Ensure the animal is en rely
supported by the pla orm - no hooves on the ground - and that no object is
res ng on the animal.
2.
In AUTO mode • the W-0 will automa cally start weighing
• when the weight becomes stable it will lock and
remain on screen un l the animal leaves the
pla orm.
• For App users: type in a VID number (if you want
to record this. Either tap
VID
or tap the Ac Ɵ ons
bu on > Add VID .
In Manual mode • press the Weigh bu on to start weighing. When
the weight becomes stable it will lock and remain
on screen un l the animal leaves the pla orm.
• For App users: type in a VID number (if you want
to record this). Either tap
VID
or tap the Ac Ɵ ons
bu on > Add VID .
Important: If the weight displayed does not always return to 0.0 a er weighing,
check for dirt or manure that may have been le on the pla orm.
The W-0 can be re-zeroed by pressing the
>0< (Zero) bu on.
• When the weight locks, there will be a beep from the scale and a red light
above the Weigh bu on displays brie
fl y.
For App users: the mobile device will beep and vibrate. The weight will be
recorded in the session on the app.
• In either mode, you can re-weigh an animal by pressing
Weigh
a er a
successful weight lock.
Start a Weighing Session on the W-0 scale:
If you are weighing animals without the Animal Performance app, once the scale is
turned on and weight displayed is zero, you can start weighing your animals. Refer
to
Weighing Animals (below) .
Note: If using the scale only, animal weights are not recorded.