SmartScale 600
User Manual
Page 29
Power feed to Electronic ID readers
The Scale can supply power to an Electronic ID reader. Power is
supplied only if the reader is connected to Port 2 and if any one of the
three Electronic ID reader options is selected.
With Port 2, if you nominate a device other than an Electronic ID
reader, power feed is disabled. If the Electronic ID Reader you are
using does not require power from the Scale, you can connect it to
either Port 1 or Port 2.
Select a country
The Select Country menu lets you select the required country settings.
The Scale country settings determine the following:
the language used with the screens and prompts;
some country-specific terminology; and
some default options.
To display the Select Country menu, complete the following steps:
1.
Turn the mode selection switch to
S
.
2.
Select
6. SELECT COUNTRY
from the Setup menu.
The following screen displays:
Changing the country
To change the country, complete the following steps.
1.
Press the
or
soft key to select the desired
country.
2.
Press
to save the changes.
IMPORTANT
: Ensure that the country set on your Scale is the
same as the country set in MyScale Pro.
