Gallagher MBS200, Инструкция по эксплуатации

Страница: 16 / 156

14
3E4723 Gallagher MBS100 MBS200 MBS400 MBS800 Mul -Power User Manual
UNDERSTANDING YOUR ENERGIZER
Using the Mode Selector Switch
Mode Descrip on
Ba ery
Check The ba ery charge level is displayed on the bar graph. Ba ery
voltage will be displayed for approximately 10 seconds only to
conserve ba ery. To recheck ba ery, switch o
ff the energizer then
switch back to ba ery check mode.
OFF Energizer is OFF. If you are not using the energizer for extended
periods, disconnect the ba ery from the energizer.
Solar Smart ba ery management ensures the energizer operates
con nuously. If the ba ery voltage is low due to prolonged
periods of low sunlight, the energizer will reduce stored energy
and pulse rate to protect the ba ery from long term damage.
Ba ery Energizer operates at maximum energy and normal pulse rate
un l 40% of ba ery capacity remains. Suitable for users who
require best energizer performance and are prepared to replace
the ba ery when needed.
Mains
Power Energizer operates at maximum energy and normal pulse rate.
Suitable for indoor permanent installa ons where mains power
is available.
Note: The energizer stops pulsing if the ba ery drops below 10% to protect
the ba ery from permanent damage. The energizer will turn on again
automa cally if the ba ery voltage increases again (for example if a solar
panel is connected and starts recharging the ba ery).