EN
2.
Contents
1.
The Birth Alarm Advanced transmitter
This sends a signal to the receiver as soon as
the mare lies down on her side.
2.
The special holder
This is where the Birth Alarm Advanced
transmitter is pushed in. This holder can be
fixed beneath the
mare’s halter
or in the ring of
the anti-roll girth.
3.
The cable ties
To get started, we have already supplied a
number of cable ties (also called "Tie-wraps") in
addition.
These cable ties are for single use, but they are
available at any DIY store.
4.
The special screwdriver.
You can use this to open your Birth Alarm
Advanced transmitter (for example when the
batteries need to be replaced or when you need
to insert or remove the SIM card).
On the back of this screwdriver there is also a
strong magnet, with which you can operate the
Birth Alarm Advanced transmitter.
5.
The Birth Alarm Advanced receiver
The signal comes in on this receiver as soon as
the mare lies down on her side.
6.
The antenna
You fix the antenna on the receiver.
7.
The Birth Alarm Advanced receiver
standard
You click the receiver on this in case of regular
use. You can also disconnect the receiver and
wear it on, for example, your belt.
8.
The USB cable
You need this cable to supply the Birth Alarm
Advanced receiver with power, or to charge the
battery of the Birth Alarm Advanced receiver.
You can also use this cable to update the
software of the transmitter or receiver. (More
information can be found on
www.birthalarm.com
9.
The charger
This provides your receiver with power for
regular use or when you want to charge the
battery.
10.
QuickStart Guide
Concise manual
