EN
6.2
Control of Birth Alarm Advanced Receiver
6.2.1 Switching on
To switch on the Birth Alarm Advanced receiver, press and hold the POWER
button / ECO button at the top left of the screen for two seconds.
6.2.2 The eco mode
You can use this to put your Birth Alarm Advanced receiver into economy mode with the POWER
button / eco button. This will turn the screen off and your receiver will use less energy. When an
alarm or warning is received from one of the transmitters, the display will immediately turn on again.
The eco mode button can be useful when, for example, you want to turn off the screen
completely at night.
6.2.3 The volume buttons
With the volume buttons you can turn the volume up and down. You can also adjust the
volume in the settings menu.
With the volume down button you can also turn off an alarm when an alert is
received.
6.2.4 The display hold button
This button allows you to block the receiver's touch screen
and buttons. Press and hold this button until the key symbol
appears. To unlock the receiver, press and hold this button again.
You can use the display hold button when wearing the
receiver on
your belt
trousers, so the receiver will not react if buttons are accidentally pressed by your
movement.
6.2.5 Navigation on the main screen
After switching on, you will see the main screen. This
consists, roughly, of two parts:
1.
The navigation bar
2.
The information field
6.2.5.1 The navigation bar
In the navigation bar you will see four tabs with a battery indicator (from the receiver itself) and a
settings button.
When a Birth Alarm Advanced transmitter is logged on to your Birth Alarm Advanced receiver, an
icon of a horse's head will become visible on the relevant tab. On the bottom left there is a small
symbol which will show the status.
