19.11.2021, 11:52
Base Block
base.galileosky.com/articles/#!en-documentation/base-block-user-manual
13/28
Determination of Strike and Incline
All devices can determine the device`s strike and incline.
To determine strike:
Install the tracking device so as one of the accelerometer axis looks vertically, it will
exclude false detections on road bumps;
Turn on strike and incline determination by
SHOCK
commanand. For example, if
Z
axis is vertical:
SHOCK 3,90,5,1200
.
A strike is an acceleration increase in horizontal plane; the correspondent bit is put in the
Device
state field and strike coordinates are recorded.
To determine incline:
1. Install the tracking device in a vehicle;
2. By
SHOCK
command set maximum allowable incline angle and allowable time of
this angle exceeding. For example, a maximum angle is 20º, allowable exceed time
is 5 seconds;
SHOCK 3,20,5,1200
.
On the tracker homing position change in a vehicle,
SHOCK
command should be given to
adopt the device to a new position.
Data Archiving to the MicroSD Card
The saved data will be ordered in the following way:
X:\Arc\
1.gsa
2.gsa
...
10.gsa
Code
