Galibier Design Serac, Руководство по установке

Страница: 3 / 24

Table of Contents
1 Introduction................................................................................ 1
2 Preparation and Unpacking ...................................................... 1
2.1 Preparation: .....................................................................................................1
2.2 Unpacking and Organizing the Components....................................................2
2.2.1 Unpacking....................................................................................................2
2.2.2 Organize the Components According to the Assembly Steps.......................2
3 Installing the Bearing and Platter............................................. 4
3.1 Install the Brass Bearing Body: ........................................................................4
3.2 Install the Ground Wire on the Bearing ............................................................4
3.3 Install the Bearing Spindle ...............................................................................5
3.4 Install the Platter & Seat the Bearing ...............................................................6
4 Fitting the Belt and Installing the Motor Pod........................... 7
4.1 Fit the Belt .......................................................................................................7
4.1.1 Position the Motor Pod.................................................................................7
4.1.2 Fit the Belt (preliminary) ...............................................................................8
4.1.3 Fine Tuning Belt Position .............................................................................8
4.2 Set Final Belt Tension and Motor Speed..........................................................9
5 Armboard, Arm, and Cartridge Installation and Setup: ........ 12
5.1 Sample Installation – Triplanar Tonearm........................................................12
5.2 Arm and Armboard installation.......................................................................12
5.2.1 Mount the Armboard to the Turntable Base................................................13
5.2.2 Mount the Tonearm....................................................................................14
5.2.3 Orient the Tonearm’s “Parked” Position. ....................................................14
5.2.4 Reset the Pivot to Spindle Distance. ..........................................................15
5.2.5 Verify the tonearm's orientation when locked in the arm rest......................15
5.3 Mount the cartridge........................................................................................15
5.4 Remaining Adjustments .................................................................................16
5.4.1 Triplanar.....................................................................................................16
5.4.2 Schröder ....................................................................................................16
6 Cleaning and Maintenance...................................................... 18
6.1 Cleaning ........................................................................................................18
6.1.1 Aluminum Parts..........................................................................................18