Galcon 61 Series, Инструкция по установке и эксплуатации

Страница: 18 / 35

16
6. Additional Functions
6.1 One-Time Irrigation
This function is used to program the irrigation controller to operate
the irrigation system once only, for the set
irrigation duration, at the set time.
(Duration set as described in Section 5.4).
1. Press "Enter" until "Days"
appears.
2. Press "Set" several times (for all the
days of the week) until "Cyclical"
appears, and "OnCE" blinks on the display.
3. Go to Section 5.1 to set the day and time.
6.2 Cyclical Irrigation
This option is used to program the irrigation controller to operate
the irrigation system in a cyclical manner,
once every x days, for the irrigation
duration.
NOTE - Duration for which valve
stays open set as described in Section 5.4.
1. Press "Enter" until "Days"
appears.
2. Press "Set" several times (for all the days of the week)
until "Cyclical" appears, and "OnCE" blinks on the display.
3. With the display blinking, press “Plus” or “Minus” .
The interval between irrigation sessions (irrigation cycle) in
days, hours or minutes is displayed. For example, if you set 2
days,
the irrigation will be performed every two days for the defined
duration.