Questions?
www.galbreathproducts.com
1-800-285-0666
17
Structural and Weld
Integrity
Check to ensure proper and safe working condition of structural
members. Make sure wear is within normal guidelines. Inspect weld
joints.
Front and Rear Stops
Check to ensure proper and safe working condition of stops.
Nuts, Bolts, Shafts, Cotter
Keys, etc.
Check to ensure proper and safe working condition. Make sure wear
is within normal guidelines and all items are within proper torque
guidelines.
Rollers, Sheave Blocks, Rear
Hinge, Pivot Points
Check to ensure proper lubrication, adjustment and operation.
Container Hold-Down
Devices
Check to ensure proper and safe working condition.
Hoist Cable
Inspect the cable daily and conduct a thorough inspection every 40 hours
of usage for breakage, unraveling, or flat spots. Inspect cable ends,
clamps and pins as well. Lubricate the cable frequently to prevent rusting.
Reflectors/Lights
Inspect all lamps and reflectors daily. Make sure they are cleaned and in
proper working order.
Electrical Wiring
Inspect all visible wiring to ensure that it is not frayed, is properly
supported and protected, and all connections are tight.
Wire Splicing
Use wire connectors with shrink tubing for water-tight connections.
Back-up and Hoist-Up
Warning Systems
Verify proper and safe operation.
NOTE: Always apply conductive (dielectric) grease in receptacles and in bulb sockets prior to re-assembly.
PREVENTIVE MAINTENANCE – MECHANICAL
PREVENTIVE MAINTENANCE – ELECTRICAL
