Of water and increase the shower
temperature
To decrease the shower temperature
Turn the temperature control knob
anti-clockwise, this will increase the
flow of water and decrease the shower
temperature.
5.
To turn off the shower unit press the
STOP
button.
6.
Remember! Water will continue flow for
a few seconds whilst the programmed
‘Phased Shutdown’
operates.
7.
A small amount of water will be retained
in the showerhead after the shower has
been turned off. This may drain over a few
minutes.
8.
Switch of pull-cord or wall mounted
switch.
I
I
I
11
SECTION
OPERATING FEATURES
Auto Reset Neon Indicator
The
I
Auto Reset Neon Indicator will be
illuminated during normal operation if an
overheat temperature is sensed, power
to the element will be cut off, water will
continue to flow until the unit has cooled
sufficiently. Power to the elements will be
automatically restored.
If the Auto Reset Neon Indicator
persistently functions, ensure that the
showerhead is free from scale and debris
which will increase the flow of water
through the unit.
Low Pressure Neon Indicator
The low-pressure indicator will be
illuminated during normal operation if
there is a drop in mains water pressure
too low to operate the shower unit. Also
I
I
I
turn the flow control knob anti-clockwise to
increase the flow of water through the unit.
Phased Shutdown
The Phased Shutdown ensures that water
will continue flow for a few seconds when
the STOP button is pushed. This hot water
flushing out program ensures that anyone
stepping into the shower immediately after
use does not have a an unpleasantly hot
start to their shower. This process will also
increase the life expectance of the unit in
hard water areas reducing lime scale build
up.
I
I
12
SECTION
SHOWERHEAD CLEANING
INSTRUCTIONS
The shower head should be cleaned
periodically to remove limescale or debris
which will reduce the performance of the
shower. The frequency of cleaning will vary
according to local water quality. In hard
water areas cleaning will be needed more
often than in soft water areas. A liquid
non-abrasive bathroom cleaner may be
used on external surfaces of the handset.
Daily Cleaning
To break away scale on a
daily bases, rub your thumb
over the surface whilst the
shower is running.
Periodical Maintenance
If scale deposits are stubborn,
soak the shower head in
proprietary limescale remover
and rinse thoroughly before
use.
GUARANTEE
Applied Energy Products Ltd
guarantee this Galaxy product for a
period of two years, from date of
purchase, against mechanical and
electrical defects arising from faulty
materials or from poor workmanship,
providing the product has been
installed by a competent person in
accordance with the fitting instructions.
undertake to repair or replace, at
their discretion, without charge,
provided the product has been
properly maintained and operated in
accordance with the operating
instructions. Any component found
to be defective during this period,
as the result of misuse or damage,
or the effects of scaling, will not be
covered by this guarantee (with the
exception of
‘si’
(‘Scalemaster’)
models which are guaranteed
against the effects of scaling).
This product must not be modified,
repaired or taken apart except by a
person authorised by
.
This Guarantee is only valid within
the United Kingdom and does not
cover product used commercially.
This Guarantee does not affect your
statutory rights.
Applied Energy Products Ltd
Applied Energy
Products Ltd
Applied Energy Products Ltd.,
Morley Way, Woodston, Peterborough,
Cambridgeshire PE2 9JJ
Telephone: 01733 456789 -
Fax: 01733 310606 -
Website: www.galaxy-showers.com
ATTENTION!
DO NOT OPERATE THE SHOWER
UNIT IF THE SPRAYHEAD OR HOSE
BECOMES DAMAGED.
THE SHOWER IS DESIGNED AND
APPROVED TO EN-60335 WITH
THE HANDSET PROVIDED.
UNDER NO CIRCUMSTANCES
I
MUST ANY HANDSET THAT IS NOT
APPROVED BY THE MANU-
FACTURER BE USED WITH THIS
PRODUCT.
