Galaxy Innovations ComboF, Руководство пользователя

Страница: 10 / 60

User`s Manual
8/18
5.4. S
PECTRUM
C
HART
This menu will show the spectrum chart of setting
frequency range on current cable line. Press [

/

] to
switch curser focus between Start Frequency, LNB Type,
End Frequency, LNB Power/22K and Current Frequency
Mark.

--K: Show the 22k status. -–K: 22k off; 22k: 22k on
 --V: Show the RF power output status. The values are: 13V, 18V and OFF(--V)

40~70~100: The range of power level. And the range is 0 ~ 100


:
The current frequency curse, press [

/

] to set the current frequency.
 03500: The start frequency of the spectrum chart. Press [OK] to edit it.
 mark: The power level value of current frequency

04000: The end frequency of the spectrum chart. Press [OK] to edit it.

cur: The current frequency

05150: The current LNB type mode.
Press [

/

] to switch between LNB types.
Press [OK] button to check whether the current frequency
can be locked or not. A dialog will show the locked
transponder once it locks.
5.5. C
ONSTELLATION
Move the curse to Constellation icon and press OK to select
satellite and transponder for constellation analyzer. See the
figure below:
 042.0°E Turksat3/4A: The current satellite. Press [

/

] to switch between
satellites and press [OK] to enter satellite list to select satellite.
Press [OK] button to select the focused satellite and press
[MENU] to exit from edit menu. All the other parameters on
the menu will be refreshed according to the selected satellite.
 11096/H/30000: The current transponder, press [

/

] to switch between
transponders