User Manual Basic Operations
10
7. Connecting
7.1 Connecting the Antenna
Connect one or two satellite coaxial cable from the wall to LNB IN.
TV with Motorized System (DiSEqC 1.2)
Connect one end of your coaxial cable to the LNB IN connector on the receiver and the other end to the REC or
Receiver connector on the DiSEqC 1.2 motor.
Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 motor.
All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible.
This allows multiple antennas to be connected to the receiver at the same time.
If you have two or more fixed antennas, then we recommend you use a DiSEqC 1.0 switch.
Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch.
Do the same for any other LNBs that you have.
Connect one end of a coaxial cable to the RF output connector of the DiSEqC switch,
Connect the other end to the LNB IN socket on the receiver.
To the digital receiver, you can connect either a single satellite antenna directly or LNB of
Multi-feed equipment.
7.2 Connecting the TV
1
TV with the HDMI connector:
For the best picture quality, connect the product and TV using an HDMI cable.
2
TV with the SCART connector:
For good picture quality, connect the product and TV using a SCART cable.
3
TV with the AV connector:
To output video and audio, connect the product and TV using an AV cable.