OPERATION:
POWER ON/OFF
l
constantly until “2” is pressed again.
l
Tape Counter “10” will display zero (000).
l
Both LED's “7” & “8” will flash twice, then the indicator of “4” will light.
OPERATIONS & FEATURES
l
Insert the cassette, with Side-A facing up, into the slot “1”.
l
Both “7” and “8” LEDs will blink continuously until the user's next action,
which indicates the tape is loaded correctly.
l
Press “13” or “16” to go the beginning of Side-A or Side-B respectively.
“7” or “8” will blink while the tape is fast forwarding or fast rewinding
respectively. When the tape reaches the end, both “7” and “8” will blink
continuously until the user's next action.
l
Press “15” to play Side-A or press “14” to play Side-B. When “15” is
pressed, “10” starts to count ascending from zero (000) or wherever it
was stopped, and “7” will be lit continuously. When “14” is pressed, “10”
starts to count descending from zero (000) or wherever it was stopped,
and “8” will be lit continuously.
l
Press “11” to set the mode of the songs that will be played: Each press
of the button will step through the 3 modes and “4” will indicate which
mode is active. The 3 available modes are:
One Way Auto Stop
(plays side-A or side-B only. The unit will stop
when reaching the end of the side.)
Two Way Auto Stop
(plays side-A, then side-B, then stops; It will
always stop after playing side-B.)
Auto Reverse
(Looping continuously from one side to the other; no
stopping.)
l
Rotate “19” to adjust the desired volume.
l
Counter Reset: Press “5” at anytime when Side-A or Side-B is playing.
“10” will be reset to zero (000).
l
Press “17” to pause. When “17” is pressed, “7” and “8” will flash
alternately until “17” is pressed again. Press “17” again to resume play.
No other functions can be executed until “17” is pressed to resume, or
“18” is pressed to stop.
l
“18” Stop / Eject may be pressed at anytime. After pressing once, both
“7” and “8” will blink continuously until the user's next action. Press
twice to eject the cassette.
l
FF “16” (Fast Forward) and REW “13” (Fast Rewind) modes: When the
tape reaches the end, both “7” & “8” will start blinking, and the system
will automatically stop and wait for the user's next command.
Press “2” Power Switch to turn on the unit; “3” Power LED will be lit
Содержание RM2
Страница 1: ......
