For your safety, please do not turn the knob to the position “ ” to remove clothes
while the machine is running as the temperature of water may be high and it may
scald you. The door lock will open automatically at the end of a wash cycle while
the temperature of the drum is cooling down.
This function is to add an extra time on the programme you selected.
5.Wash+
3.Fumction
Press this button to start or pause a wash cycle. The door cannot be opened when the machine
has started. You can press this button to pause the running cycle and turn the knob to select
another program, then press this button again to start the selected wash cycle.
4.Rinse
This function is to add an extra rinse on the programme you selected.
The functions of the control panel
The functions of the control panel
Use process
Use process
2.Start/pause
1.Knob
8.Temp
Press this button repeatedly to change the spin speed. Full details can be found on page 9
7.Speed
Press this button repeatedly to set the delay time of the start of a wash cycle from 1 hour to 24
hours.
6.Delay
Turn this knob clockwise or anticlockwise to select the required wash program. The detail is in
Form on page 8. (Note: At the end of a wash cycle, the knob must be turned to the position“ ”)
Press this button repeatedly to change the wash temperature. The detail is in Form on page 9
There are four basic functions: “Soft”, “Anti-Ironing”, “Water+”, “Pre-Wash”.
Soft
This function can reduce the clothing folds by running the “SteamFresh” programme after
the rinse and spin.
Anti-Ironing
This function is to reduce the creasing of clohes during a washing cycle. Once
this function is selected, the machine will not execute the last drain unless the “Start/Pause”
button is pressed. (Note: The max running time of this function is 12 hours. If it exceeds 12 hours,
the machine will drain and spin automatically.
Water+
This function is to add extra water on the programme you selected.
Pre-Wash
this function is to increase a washing for very dirty clothes, the washing duration will
be extended.
Child lock (“Rinse+ ” + “Speed”)
The function of “Child lock” is to lock the control panel to prevent the misuse by children .
1.Press the “Rinse+” and “Speed” buttons simultaneously for 3 seconds.
When the icon “ is lit up on the screen, the function is activated. This function can be selected
during a washing cycle.
When this function is activated, all keys and knobs are unavailable, except for the knob turn to
the position “ ”
”
2.
Mute (
)
“
”
Temp
The function of “Mute” is to close all the prompt tones and alert sounds.
To activate this function: Press the “Temp” button for 3 seconds.
How to cancel this function: Press the “Temp” button for 3 seconds again.
Display icon explanation
Delay time: This icon indicates that the delay time function is active.
Child lock: This icon indicates that the child lock function is selected
Door lock: This icon indicates that the door is locked.
Main wash: This icon will be bright in standby mode. When selected with the main wash function the
icon will flicker when the machine is in operation. The icon will be bright in pause mode and extinguish
when the machine finishes its cycle
Rinse:
flicker when the machine is in operation. The icon will be bright in pause mode and extinguish when the
machine finishes its cycle
This icon will be bright in standby mode. When selected with the rinse function the icon will
Final spin:This icon will be bright in standby mode. When selected with the final spin function the icon
will flicker when the machine is in operation. The icon will be bright in pause mode and extinguish when
the machine finishes its cycle
Digital display: This icon shows the time, speed, rinse times, Error code.
Inlet timeout: this icon indicates that the water inlet is overtime, please check the water tap and
make sure it is open
Foam reducing: This icon indicates that there is too much foam during the wash. The machine will
automatically run a programme to reduce.
Balance control: This icon indicates that there is an imbalance in the clothing and that they are not
evenly distributed in the drum. The machine will automatically check 3 times before the icon is
displayed.
Spin speed: Shows the spinning speed
High water level: If the machine is paused during a washing cycle, but the door cannot be opened
due to high water level, this icon will be displayed.
Weighing: Some programmes require the clothes to be weighed before setting. For this operation this
icon will be displayed
Water hot: the machine is pause during a washing cycle, but the door cannot be opened due to the high
water temperature(
≥
60°C), this icon will display until the button“Start/Pause” is pressed to start the
machine again.
Drum clean: If this icon
, please run the “Drum clean” programme
to clean the drum.
displayed
Pump clean: If this icon
, Please check the drain pump operation and ensure it is functioning
correctly and not blocked
displayed
Содержание WMUK004W
Страница 1: ...WMUK004W WASHING MACHINE ...
