background image

7

6

TROUBLESHOOTING TIPS 

USER NOTIFICATIONS

Do not use any additional mechanical or electrical methods
 to accelerate the defrosting process

DEFROST

DISCONNECTING THE APPLIANCE

Please minimize powering down the appliance as this can affect 
the product life. After unplugging the power, please leave at least 
5 minutes beforere connecting.

Attention

Heavy frost will influence the refrigerating of the appliance and increase the 
energy consumption. Defrosting is therefore needed as the frost can reach a 
thickness of 5mm.
For manual defrost: take all the food out of the compartments; remove the 
drawers and shelves; unplug the electronic power cord;
Open the doors and wait for the thaw; wipe up water with a dry cloth.

After a power failure, even during the summer, the refrigerator can store food 
normally for several hours.
1. Discontinuation during power failure. After power failure, do not put additional 

food in the appliance and reduce the frequency of door openings. Put several 

ice cubes in a container and place in the top of the fridge if the power failure 

was anticipated.

2. Discontinuation during vacation. If the appliance is being left for a short 

period, please consider any foods that may go off during this period and 

dispose of accordingly. Ensure the doors are tightly closed before leaving. If 
the appliance is being left for an extended period, please remove all food and 
turn off the power. Once defrosted please clean up the liner, wipe dry and 

leave the door open until return.

3. Stop using

If the refrigerator is not going to be used for a long time, please unplug, 

cleanup, and leave the door open to get rid of unpleasant odours.

1. Do not splash water on the refrigerator, as it will cause oxidation and 
    malfunction. Electronic component such as the on/off button should be wiped dry.
2. The following cleaning agents should not be used as they may damage the 
    painted cover and plastic: Soap powder, abrasive cleaning powder, alkali 
    cleansers, chemical cloth, thinner, alcohol, acid, petroleum products, hot water.
3.  Any spillages, splashes or smears on the internal plastic components can 
    cause damage if not wiped clean.
4. Please check the points below after maintenance:
    (1) Is there any damage or loss of the electronic wire?
    (2) Can the plug be put into the socket reliably and smoothly?
    (3 ) Is the plug heating abnormally?

Warning

Please remove the door gaskets before disposing of this 
appliance. Disposal must be carried out in line with local authority 
requirements.

During normal use, please do not interrupt the power as this could affect the life 
of the appliance. If the units do need to be turned off, please allow at least 5 
minutes before turning back on
1. The refrigerator does not work

It may not be connected to the power supply (plug, power cut or fuse); Voltage is 

too low. 

2. The refrigerator does not work efficiently as expected It maybe caused by 

heavy frost, a warm temperature setting, or frequent door operation.

3. It makes unusual noise It may be caused by an imbalance or loose location 

of the appliance, or by resonation between the appliance and other objects.

4. The compress or keeps working for a long period. The location environment 

maybe too hot. The doors maybe opened too frequently
or left open. The temperature control knob set (4-7) may increase the working 

time of the compressor.

5. Foul odour present

Food with strong odours should be packed tightly before being put inside the 

appliance.

6. Water leaks from the bottom of the refrigerator. The drain tube is jammed. 

Please use a proper tool to unblock it.

7. Heavy frost occurs on the rear of the appliance. Putting humidor hot food 

into the appliance may cause this problem. Or it maybe caused by high humidity.

Отзывы: