Galanz RED500JAH-SACH0A, Руководство пользователя

Страница: 24 / 28

23
Express Cooking
1. In standby mode, touch one of number pad from
1 ‐ 6
.
2. Touch
Start/Add 30Sec
pad to confirm. The oven will start cooking at full power level.
Setting the Timer
Suppose you want to time a 3 minutes cooking.
1. In standby mode, touch
Clock/Timer
pad twice “ENTER KITCHEN TIMER” will cycle display.
2. Use the number pads to enter time.
3. Touch
Start/Add 30Sec
pad.
Child Lock
The child lock prevents unsupervised operation by children and this program only works in standby
mode
To set, in standby mode, press and hold
Stop/Cancel
for 3 seconds. LOCK is indicated on the display.
To cancel, press and hold
Stop/Cance
l for 3 seconds. LOCK indication disappears.
SYSTEM PROTECTION
E ‐ 13 ‐ High Temperature Protection: While entering into super high temperature protection status,
the system sounds beeps and the display shows “E ‐ 13”, after troubleshooting, press
Stop/Cancel
pad
to return normal condition.
E ‐ 15 ‐ Low Temperature Protection: While entering into low temperature protection status, the
system sounds beeps and the display shows “E ‐ 15”, after troubleshooting, press
Stop/Cancel
pad to
return normal condition. Please call for consumer service to check.
E ‐ 12 ‐ Temperature sensor short circuit: When the temperature sensor is short circuited, the system
enters into protection mode and sound beeps, the display shows “E ‐ 12”, after troubleshooting, press
Stop/Cancel
pad to return normal condition.
E ‐ 11 ‐ Temperature sensor open circuit: When the temperature sensor is open circuited, the system
enters into protection mode and sound beeps, the display shows “E ‐ 11”, after troubleshooting, press
Stop/Cancel
pad to return normal condition.
E ‐ 22 ‐ Humidity sensor short circuit: When the humidity sensor is short circuited, the system enters
into protection mode and sound beeps, the display shows “E ‐ 22”, after troubleshooting, press
Stop/Cancel
pad to return normal condition.
E ‐ 21 ‐ Humidity sensor open circuit: When the humidity sensor is open circuited, the system enters
into protection mode and sound beeps, the display shows “E ‐ 21”, after troubleshooting, press
Stop/Cancel
pad to return normal condition.
E ‐ 14 ‐ Preheat alarm: During preheat process, if the oven cannot reach the preheat temperature
within 30 minutes, the oven will sound beep and show”E ‐ 14”, after troubleshooting, press
NOTE:

The longest time you can set is 99 minutes and 99 seconds.

Once you have set the timer function, in either cooking or standby mode, you can check the
countdown by press
Clock/Timer
pad twice.