Galanz GL1SS24TBD, Руководство пользователя, Страница: 20 / 28

USE
AN
D
CARE
USE AND CARE
19
From the ON position (ventilation system), press and hold for
2-seconds the Delayed Power-Off Button to modify the Delayed
Power-Off System
Use the Increase Value Button and Decrease Value Button to
adjust the Delayed Power-Off System
The Delayed Power-Off System can be adjusted from 1 to 9
minutes.
Check if the range hood has been plugged in, make sure that all
power has been turned back ON, and all electrical wiring areprop-
erly connected. Swap out light bulb to working ones to determine
Whether it is caused by defective bulbs. See Replacing the light
bulbs on Page 20.
Adjusting the Delayed Power-Off System
Note
：
For all other inquiries, please contact us. Our
contact information can be found on the back cover
page.
Troubleshooting
If the range hood or light does not operate after
installation:
The blower might be jammed or scraping the bottom due
toshipping damage. Please contact us immediately.
The lights work but the blower isnot spinning, is stuck or
is rattling.
The range hood might not have been secured properly on to
theceiling or wall. Check with your installer.
The range hood vibrates when the suction is on:
Check that the duct sized used is at least 6".Range hood WILL
NOT function efficiently with insufficient duct size. For example: T
duct over 6" hole and loosely secured.
Check if duct is clogged or if damper unit (half-circular flapper)
isnot installed correctly or opening properly. A tight mesh on aside
wall cap unit might also cause restriction to the air flow.
The suction or fan seems weak: