Galanz GL1SS24TBD, Руководство пользователя, Страница: 17 / 28

16
OPER
ATIO
N IN
STRUC
TIO
NS
WARRANTY REGISTRATION
INSTALLATION
INSTALLATION
To install the filters, postion the filters in the correct direction
with the latch facing down and angle the rear section (end
without the latch) into position, hooking the hanging tabs of the
filter into the correct spaces of the hood. Continue to push and
pivot the filter upward, while depressing the latch until it fits into
place. Release the latch again and push thelatch end of the
filter upward. Test that the filters are in place by slowly moving
your hands away, if it does not move, then the filter is installed
correctly. An additonal test to ensure the filters are properly
installed is to poke or grab at the edges of the filters and give
them a tug while keeping your hand below to catch them if they
are lose.
10.
Install the filters
After installing there will be fingerprints on your rangehood. To
remove finger prints use a soft cloth andwarm water. For
tougher spots, use warm water anda mild soap.
Lightly wipe away any left over water or moisture.ALWAYS
wipe in the direction of the grain of thebrushed stainless steel.
NEVER wipe in a circularmotion, against or across the grain of
the stainlesssteel. Use a specialized stainless steel cleaner
forthe toughest of stains or soils. Always spot test thecleaner in
a hidden spot and follow all manufacuturerinstructions on how
to use on the range hood.
11. Cleaning the range hood