GALA Sensitive Smart, Инструкция по установке и руководство пользователя

Страница: 25 / 60

The massage is performed by a combination
of water and air injection, through a set of 6
swivelling jets (4 l 2 Plantain,
rectangular format, fig.27, fig.28 and fig.31;
6 lateral, angular format, fig.27 and fig.31; 4
dorsal jets, fig.29) and 10 hot water jets
placed on the floor of the bathtub (fig.30).
The lateral and plantain jets massage is
characterised by the effect produced by the
combination of water and air, discharging a
submerse water jet which provides a skin
regeneration and a full muscular relaxation in
the areas of direct contact. The lateral jets
provide an intense and stimulating massage
on the skin and muscles.
The four dorsal jets with a swivelling effect
apply a smooth located pressure effect of in
the back and lower back area so as to relieve
the accumulated pain due to pressure and
incorrect postures during the day. This system
is recommended to relieve the rheumatism
and muscle pain.
The massage applied by the hot water jets
placed on the bathtub floor provides a
massage of the entire body offering a
bubbling feeling which helps the nervous,
heart and blood systems relaxing action.
This massage also offers an increase of the
skin elasticity and stimulates muscles.
3
5 4 6
25ºC 15'
2
1
7
6
22
FUNCTIONS | SENSITIVE SMART
1 – Tactile Remote Control
2 – Lid to fill the container with the
disinfectant solution
3 - Lateral Jets
4 - Floor Jets
5 - Foot Jets
6 - Dorsal Jets
7 - Water Discharge Valve
8 – RGB LED Light
It is also ideal to fight cellulites, obesity and
stretch marks thanks to its peeling effect on
the skin.
The effervescent effect airs the skin, allowing
the cosmetic products recommended for this
aim and regularly used for the skin care to
enhance their effects.
The LED system (fig.32) allows creating a
pleasant and relaxing environment in your
bathtub, increasing the well-being feeling in
your hydromassage bath.
Its different colours convey energy, which
helps to relax. This LED light has two ways of
functioning:
• Automatic sequence of the colours, with a
15 seconds stop in each one.
• Selection of a specific colour, according to
the effects desired (see table on page 48).
This equipment has a disinfectant solution
container, with a lid in the upper part of the
tub to fill it. The container capacity is of 1,25
litres and it must be refilled when showing
the corresponding icon on the screen. (fig.33)
The Sensitive Smart System is activated by a
tactile remote control (fig.34).
From the tactile control you may select a
continuous or pulsing massage type. The first
means the hydromassage always has the
same intensity. In the pulsing massage the
intensity increases and diminishes in a
progressive and alternate way during the
bath. (fig.35)
Not only practical and efficient this system is
also equipped with an electronic sensor of the
water level, for your safety, preventing the
bathtub to be activated if empty(fig.36).
The Sensitive Smart System has a heater to
help keeping the water temperature, which
allows maintaining the water with the
indicated temperature using the tactile
control, when activating that function (with a
deviation of more or less 1ºC). (page 51)
25ºC 15'
PULSING CONTINUOUS PULSING CONTINUOUS
Fig.27 Fig.28
Fig.29
Note: After your hydro-massage bath and having emptied the bathtub, the air system
will automatically be activated for 2/3 minutes to eliminate the remaining water.
Fig.36
23
Fig.34 Fig.35
LED RGB
Fig.32 Fig.33
Fig.31
Fig.30