GALAXY 5
The new features of GALAXY helmet, it uses unique optical technology, so as to make the filter have the best
vision color meeting physiological needs and high definition.
Warning: read and understand all instruction before using! Severe personal injury could occur if the user fails to
follow the aforementioned warnings, and/or fails to follow the operating instructions.
1. Before
welding
-- Auto-darkening filter welding helmet comes ready for use. The only thing you need to do before your welding
is to adjust the position of the headband and select the correct shade number for your application.
-- Check the front cover lens to make sure that they are clean, and that no dirt is covering the four sensors on
the front of filter cartridge. Also check the front/inside cover lens and the front lens retaining frame to make
sure that they are secure.
-- Inspect all operating parts before use for signs of wear or damage. Any scratched cracked, or pitted parts
should be replaced immediately before using again to avoid severe personal injury.
-- Check for light tightness before each use.
-- Select the shade number you require at the turn of a shade knob. Finally, be sure that the shade number is
the correct setting for your application.
-- Adjust headband so that the helmet is seated as low as possible on the head and close to your face. Adjust
helmet’s angle when in the lowered position by turning the adjustable limitation washer.
-- Choose the weld/grind switch position correctly before welding.
- Magnifying lens: The filter can be assembled with magnifying lens conveniently, please purchase magnifying
lens if need.
2.. Specifications
Viewing Field:
100*65mm (3.94" × 2.56")
UV/IR Protection:
Up to Shade 16 at all time.
Function:
“WELDING”/ “GRINDING” can be selective
Light State:
Shade 3 (& 3.5)
Variable Shade:
From “Shade 4 to shade 8” “shade 9 to shade 13” can be internal selective.
Please first choose the position of “MODE” switch on filter (three position for
choosing), so as to correspond with internal shade adjustment knob’s area.
Reaction Time:
0.000033 sec (1/30,000s)
Delay Time:
Short- Long (It can vary at 0.3s-0.9s)
Sensitivity:
inside can be continued adjustable
Sensors:
Four Infrared detector
Power Supply:
Solar cells + lithium battery (replaced battery)
Power On/Off:
Fully Automatic.
Operating Temperature: - 5°C to + 55°C (23°F to 131°F).
Storing Temperature:
- 20°C ~ + 70°C (-4°F to 158° F).
Helmet Material:
High-impact resistant Polyamide (Nylon)
DIN EN 175 B CE
Total Weight:
480g
The product is in full conformity with related DIN EN 379, DIN EN 175 safety standards and ANSI/ISEA Z87.1-
2015 safety standards.
Before welding, please keep clean on filter, front cover lens and inside cover lens and four optical sensors. If front
cover lens and inside cover lens are blurry and cannot be clean, please replace them immediately.
Содержание GALAXY
Страница 8: ...GALAXY 8...