GaitKeeper GK1800T, Руководство пользователя

Страница: 8 / 26

litegait.com / 800.332.WALK / 480.829.1727
8
1. Remove the protective packaging materials and discard.
2. Position the Pedestal such that the pedestal is between motor cover and
-20 x ½ Allen screws
(Figure 1).
NOTE: Make sure pedestal is firmly attached to base.
Figure 1
3. Connect cord from lower hood to upper hood (Figure 2).
WARNING: Do Not Connect short cord to power outlet
Figure 2
4. Remove plastic from hand rails and discard. Fit rails onto pedestal. Be sure
that all screw holes are properly aligned (Figure 3).
Figure 3
5. Insert long screw with bolt head on outside of the pedestal at both the
upper and lower bracket with the nut on the inside of Pedestal. Tighten
Figure 4
6. Attach Console panel to Pedestal sliding into the bracket on the top of the
Pedestal (Figure 5).
Figure 5
TOOL REQUIREMENTS
5/32 Hex Key (included)
9/16 Open End Wrench (not included)
Assembly Instructions - 220V Models
NOTE: Do not lift the treadmill by the motor when removing from carton!