GaitKeeper GK1800T, Руководство пользователя

Страница: 6 / 26

litegait.com / 800.332.WALK / 480.829.1727
6
Assembly instructions
Basic Guidelines for Setting Up Your Treadmill
After removing the treadmill from the packaging, place your treadmill on a clean, level surface. Make sure the electrical cord
easily reaches a grounded three-pronged outlet and has enough slack to allow the deck to incline without tightening the cord.
Do not allow the treadmill assembly to rest on the cord.
Important Electrical Requirements 110V
s
nothing else can be plugged into the same circuit. Most power circuits are rated for this 110V AC 15 amp requirement, but you
must ensure the treadmill does not share the circuit with anything else.
Important Electrical Requirements 220V (INTERNATIONAL ONLY)
ns
nothing else can be plugged into the same circuit.
Danger: Do not use an extension cord or ungrounded outlet.
The ground helps prevent electrical damage to your treadmill and enhances your safety by helping to prevent shock. Check with
a qualified electrician or serviceman if you are in doubt as to whether the treadmill is properly grounded. Do not modify the plug
provided with the treadmill if it will not fit the outlet. Have a proper outlet installed by a qualified electrician.
Component Checklist
ITEM DESCRIPTION QTY
A Console 1
B Frame 1
C Pedestal 1
D Hand Rails 2
E Magnetic Safety Key 1
F - 4
G - 4
H -16 Lock Nut 4
I 4
J Hex Key 1
A
B
C
D
E F G
H I
J
Hardware Kit