Gait up GAIT UP GO Скачать руководство пользователя страница 13

Страница: 13 / 51

3. D

ESCRIPTION

3.1. Overview

The Gait Up GO medical device components are delivered in a dedicated shipping box.

Quantity

Component

Article number

Instructions for Use Lay

person

GOIFUh

Quick start Guide Lay person GOQSGh

Device case

GOC

Physilog6 sensor device (*)

Belt clip and strap(*)

BCS

Shoe clip(*)

USB cable(*)

USBCc

Gait Up GO mobile

application pre-installed in a

mobile/phone tablet

Table 2. Gait Up GO components. (*) are accessories. The related technical specifications are

provided in section 9 of the present document.

WARNING: Do not use any external power supply (mobile phone charger) other than the one

provided by your Healthcare Professional. Always refer to the device manual for proper

charging instructions.

Note1: Check the shipping box content for any missing component and for any damage that

may have occurred during transportation.

Note 2: It is highly recommended to keep the Gait Up GO medical device components in the

original device case when it is not used, positioned in the corresponding slots as they were

delivered originally.

Gait Up GO medical device can be operated only through a mobile phone (iOS & Android) or a

tablet (iOS & Android) where Gait Up GO app has been installed:

●

Gait Up GO Application is freely available for installation on Google Play Store and

Apple App Store

ENGLISH

13/51

Содержание GAIT UP GO




















































Результаты поиска

Содержание GAIT UP GO

Отзывы:

Похожие инструкции для GAIT UP GO

Бренды по названию

Популярные бренды

Gait up GAIT UP GO, Инструкция по эксплуатации

Результаты поиска

Содержание GAIT UP GO

Отзывы:

Похожие инструкции для GAIT UP GO

Бренды по названию

Популярные бренды