GAINWISE TECHNOLOGY SS1603-08, Руководство пользователя, Страница: 20 / 28

SS1603-08 3G Audio Intercom (E5) 07262019
20
User commands to check system info & control relay via SMS
Note: for these function codes there is no need to start with *12*1234# in the command codes just simply use the
command as below.
No. Function Command Reply
1 check signal strength *20# Signal Level 0~31 from poor to best
Service provide name, network
2
Check stored numbers
of dial- in to open
*21#
I [ number]…..E (N)
I
：
dial in to open numbers list
E
：
End
N
：
Next SMS
3 Check relay / detect status *22#
Relay 1[ status], Relay 2[ status],
Detect [ Input ], IN1 [ Input ]
Status: hold/ release/ trigger
Input: on/ off
4 Check detect SMS content *26*1234# Default PWD 1234
Detect PIN Trigger
5 Check intercom move
detection SMS content
*27*1234# Default PWD 1234
Case open
6 Check power loss
SMS content
*28*1234# Default PWD 1234
Power loss
7 Check power active
SMS content
*29*1234# Default PWD 1234
Power active
8 Check input 1 triggered
SMS content
*30*1234# Default PWD 1234
IN1 trigger
9
Check stored numbers of
an apartment
( dial out)
*31*1234#[call button No. 01~08]#
(PWD default 1234)
Call button No. / 123456
1.Tel No.1
2.Tel.No 2
3.Tel No.3
123456: relay 1 and 2 trigger/
hold/ release codes
●
SMS data error
(Only 0~9
、
* are available)
SMS Data Error
●
Function code error
Function Code Error