Page 4
Page 5
Page 6
Installation
Step 5: Connect the Video input
Remote Control
Trouble Shooting
PC Audio
Line In Cable
Co-axle Cable
Connect Co-axle source
Connect Composite source
Composite
Cable
Composite
Connection
Cable
Connect S-
Video
source
S-Video Cable
Channel Surfing:
Display TV channels in thumbnail
mode
Source:
Switch between TV Air/TV Ca-
ble/S-Video/Composite Video
Mute:
Mute Sound
Power:
Turn the TV Plus program on or off
Channel
Switch TV channel
Volume
Increase or decrease sound volume
REC:
Start video recording
Time Shift
Turn on Time Shift
Full Screen
Change video window into full
Audio Input cable
●
TV2GO will only support Windows XP and Win-
dows 2000. It will not run under Windows 98, Win-
dows 95 or Windows ME.
●
TV2GO has two types of USB connector: USB
adapter and USB cable. Please use USB cable if
there is interference problem with USB adapter.
●
TV2GO remote control sensor is located on top of
the unit. Please aim the remote control at that loca-
tion for best result.
TV Plus program
System Requirement
PC or Notebook with
●
Intel or compatible processor
●
minimum of 64 MB RAM
●
CD-ROM
●
one free USB 2.0 port ***
●
sound card with Line-in input connector
●
MS Windows 2000, MS Windows XP, MS Windows
MCE
*** Note: This product will also work on PC systems with USB 1.1,
however at low video quality and video frame rate
USB B to B Cable
PC Audio
Line In Cable
PC Audio
Line In Cable
Audio Input cable
USB B to B Cable
USB B to B Cable
Please refer to the TV_Plus directory in the CD-ROM for TV
Plus user manual.
