Single Site Programmer User Guide
1
GS-SNG-SITE-PRG-UG-001240
Page 20 of 30
Release 1.0
Populating the Module Site
ESD (electrostatic discharge) sensitive device.
Charged devices and circuit boards can discharge without detection. Although this product
features patented or proprietary protection circuitry, damage may occur on devices subjected to
high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance
degradation or loss of functionality.
ALERT!
Before populating the site, you must power OFF the board every time.
For the GS1011MEx and GS1500M
To populate the Single Site Programmer board with the modules, perform the following:
1.
Before populating the site you must power off the board; every time.
2.
Insert a module with the logo/product label facing up and the module pins aligned with the pogo
pins into the socket site (see
Figure 7: Inserting the GS1011MEx or GS1500M Module into the Socket Site
