Gainlab Audio EMPRESS GL-PEQ, Руководство пользователя

Страница: 5 / 13

2X3 BAND TUBE EQUALIZER
!
POWER SWITCH
The unit is switched on with the switch marked POWER. Set the switch
labeled POWER to the up position if you want to turn on the unit. Set the
switch labeled POWER to the down position when not in use.
Due to the tube design of the device, it is advisable to leave a “warm-up
time” of 15-20 minutes before starting use.
ATTENTION! the switch labeled POWER puts the device in standby mode, does not
completely disconnect it from the mains, if you want to disconnect the device
completely from the mains, unplug the device from the mains or switch o ff the
main switch at the IEC socket !
EQ IN, BYPASS
In BYPASS mode, the device galvanically connects its outputs and inputs,
so we can always check the sound of the compression compared to the
original signal. To select the BYPASS mode, set the switch to the lower
position. To select the EQ IN mode, set the switch to the upper position.
TUBE BOOST
By using this function, the gain of the output tube ampli fi er can be
increased, and the device adding more harmonic distortion to the signal.
This can makes the resulting sound warmer and more powerful. Set the
switch to the up position to activate the function. Set the switch to the
down position if you do not want to use the function.
!
! 4