3
parts of the body or clothing (e.g. strings, necklaces, ribbons for babies’
dummies, etc.), which would pose a risk of strangulation.
• Important -
“Co-Sleeper Adapter mode (Fixed to the parent’s bed)”,
before laying the child in it, make sure that the connection belts are
hooked and tensioned properly, the product must be secured to the
parents’ mattress and no gaps between the products and the adults’
mattress must be present.
• The product must always be placed on a horizontal surface. Never
leave the product on an inclined surface with the child inside of it.
• Children must not be permitted to play without supervision near the
product.
• Do not use the product without the side panel (textile).
• Keep the fastening belts away from the reach of children.
• Co-Sleeper Adapter MODE (FIXING TO THE PARENT’S BED) The crib
can be fixed to the parent’s bed (Co-Sleeper Adapter mode).
• WARNING - IMPORTANT FOR THE SAFETY OF YOUR CHILD:
this
method is only possible with bed types that comply with all of the
conditions described in this paragraph. In particular the side support
of the crib should always be put close to the parent’s mattress and the
mattress should always be aligned with the height of the side support
for restraint of the crib (see fig. “step 13”). Furthermore, the crib should
be firmly fixed to the structure of the parents bed or to the mattress
support (net or slats).
• WARNING:
Check to make sure that the crib in the Co-Sleeper Adapter
mode does not interfere with the parent’s bed.
• WARNING:
During use, make sure that the parents bed sheets,
blankets etc. do not enter and cover the interior of the crib.
• In order to fix the crib to the parents bed (Co-Sleeper Adapter mode)
use the pair of straps provided. Fix the straps around the structure of
the parent’s bed, from the bottom towards the top and fix the buckle
to form a loop. Repeat this operation on the other side. For easier
installation, during fixing of the buckles, we suggest that the crib is
kept at a short distance from the parent’s bed. At this point, move
the crib to the side of the parent’s bed and tighten the loop by pulling
the belts firmly. Carry out this operation on one side and then on the
other side, adjusting the belts until the crib is firmly in contact with the
parents mattress.
• WARNING:
Before every use always check to make sure that there
is no space between the parent’s mattress and the side of the crib. If
there is, pull the belts firmly to tighten until there’s no space and the
permitted condition of use has been restored.
• WARNING:
When the product is used in the “Co-Sleeper Adapter
Mode” {fixing to the bed, it should always be fitted to the long side of
access to the bed.
DO NOT
fix the product to the head or bottom of the
bed.
• Recommend mattresses sizes:
Co-sleeper crib:
78cm long x 36cm wide x 3.5cm depth
CHINA Co-sleeper V3.indd 3
18/08/2022 10:44
