GAI-Tronics RigCom 400-001 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 23

GAI-Tronics RigCom 400-001 Скачать руководство пользователя страница 19

Pub. 42004-376D

Models 400-001 and 400-002NS RigCom Stations

Page 17 of 20

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-376D.docx
09/18

Figure 11. Master/Slave Configuration with the Model 400-001 as Slave

Figure 12. Common Line Configuration

Appendix B—

Interfacing a Model 400-001 RigCom Station to EZ

Page Stations

The Model 400-001 RigCom Station is designed to operate as an addition to a system of EZ Page stations.

The EZ Page Series and Model 400-001 Stations are designed to operate either in balanced or unbalanced
systems. An unbalanced system for communication uses the negative of the audio pair as the ground
reference for the control signal. In the balanced system, the audio pair is not ground referenced and the
control signal requires a ground signal.

For interoperability between the Model 400-001 and the EZ Page Series Stations, configure the 400-001
and the EZ Page stations identically, balanced or unbalanced, using jumper

P3

on the Model 400-001 and

Jumper

P5

on the EZ Page station.

The following are wiring diagrams are for the different configurations of a RigCom/EZ Page system:

«
...
17
18
19
20
21
...
»

Содержание RigCom 400-001
























Отзывы:

Нет отзывов