GAI-Tronics Redalert 392-001, Руководство пользователя

Страница: 36 / 47

P
UB
42004-438A
300 S
ERIES
E
MERGENCY
T
ELEPHONE
M
ANUAL
P
AGE
34 of 44
f:\standard ioms - current release\42004 instr. manuals\42004-438a.doc
02/11
Password
The Password Protection feature allows you to change the four-digit password required to program the
emergency telephone. Each telephone is password protected to maintain the integrity of programmed
information and should not be disabled.
The password is required to enter the programming mode when programming the telephone locally or
from a remote location. The programming password hardware configuration must be enabled when
programming with the password. To enable the Password Protection feature, insert the
J9 jumper on pins
2 and 3. Complete the key sequence to change the four-digit password.
Feature Key
Sequence
Description
Default
Password
Protection # 1 4
N N N N
A four-digit password must be supplied to remotely program
the telephone. If you change the password and cannot enter
programming mode, see the “Password Disabled Programming”
section.
Example
: To program the password 1234 , enter
# 1 4 1 2 3 4
.
2468
Audio-answer Alert Feature
When auto-answering an incoming call, the RED ALERT™ Telephone will generate a splash tone on the
telephone line. This tone is always heard by the calling party. This tone can be pre-programmed to also
be heard over the telephone’s integral speaker using this key sequence.
Feature Key
Sequence
Description
Default
Auto-answer
Alert # 1 6
L
The Auto-answer Alert feature allows a person to call the
emergency telephone and monitor the area around the telephone
with or without sounding a splash tone over the unit’s integral
speaker.
(Disable alert tone),
L
=0.
(Enable alert tone),
L
=1.
0
(Disabled)
Off-Hook Ringing
The emergency phone can generate a ringing signal from the speaker when the phone is called. The
factory default setting for this feature is “disabled.” In addition to enabling this feature, the Auto Answer
feature must also be enabled for proper operation.
Feature Key
Sequence
Description
Default
Ringing # 2 2
L
Enabling the Off-Hook Ringing feature allows a person to call the
phone and have the phone function as a normal telephone. The
phone will ring after the splash tone is heard in the receiver if
remote programming is not commenced within 7 seconds of the
splash tone.
To enable the ringing feature (enable splash tone and ringing),
L
=1.
To disable the ringing feature (only splash tone on the phone),
L
=0.
N
OTE
:
Only Model 394AL-001 and 398-001 Phones can be
answered when they are ringing by pressing the Call button.
0
(Disabled)