Pub. 42004-480B
Model 013-02-0095-002
Elemec3
System Controller
Page 2 of 11
e:\standard ioms - current release\42004 instr. manuals\42004-480b.doc
05/14
The system provides two internal audio paths to enable simultaneous broadcast of audio to distinct output
zones. For ease of installation and maintenance all cabinet internal connections are on a plug/socket
basis.
The software control is designed to be as flexible as possible, and can easily be configured via the TCP/IP
network connection on the rear of the
Elemec3
System Controller using the
Elemec3
Console software
application. Hot standby amplifier control is provided so that a powered spare amplifier(s) is
automatically connected to the loudspeaker network of the failed amplifier(s).
PABX access and Page/Party
®
access are configured so that telephone/intercom inputs can be digitally
stored and replayed to completely eliminate the possibility of acoustic feedback between telephone/
intercom and local loudspeaker.
Up to 256 individually programmed relay outputs and 256 input contact points are available through the
LAN interface on the rear of the
Elemec3
System Controller. Duplicate
Elemec3
System Controller can
be used for additional redundancy. System status, including current audio activity, faults, input, output
and amplifier states, are monitored via the TCP/IP network connection using the
Elemec3
Portal software
application.
The
Elemec3
System Controller is exclusively designed for use in an
Elemec3
system and is not intended
for use with other types of equipment.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
