Pub. 42004-525A
Model 370-901 SP2 to Page/Party
®
Bridge
Page 13 of 16
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-525A.docx
08/18
System Reset
Hold the GLOBAL DIS press-button switch (
S1
) on the main PCBA for 8 seconds to reset the SP2 to
Page/Party
®
Bridge to factory default settings.
System Status LEDs
Eight status LEDs are located in the lower left corner on the main PCBA (see Figure 4). The status LEDs
provide indication that audio is present on each of the six audio lines, the state of the global disable
feature, and PCBA board status. All eight status LEDs are red. The audio line detection LEDs turn on
immediately when an audio channel on the Page/Party
®
system is active. The LEDs do not turn off
instantly when the audio channel is closed; a VOX circuit keeps the channel open to ensure that the
channels are not disconnected with a pause in conversation.
Table 7. System Status LEDs
LED
State
Description
PL1
On
activity on party line one
PL2
On
activity on party line two
PL3
On
activity on party line three
PL4
On
activity on party line four
PL5
On
activity on party line five
PG
On
activity on page line
G
LOBAL
D
IS
On
bridge is disabled
S
TATUS
Blinking
heartbeat LED blinks every five seconds
Ethernet Status LEDs
The bridge is equipped with three Ethernet status LEDs (see Figure 4 and Table 8).
Table 8. Ethernet Status LED Indication
LED
Color State Description
A
CTIVITY
yellow
blinking
Ethernet network status—The bridge is sending and/or receiving
packets on the Ethernet network.
1G
green
On
1000 Mb connection link
100M
green
On
100 Mb Ethernet link
Maintenance
The SP2 to Page/Party
®
Bridge contains no user serviceable parts. There are no adjustments necessary
after the device is configured using the GUDA application. There are several options in the ADMIN box
of the GUDA application for maintenance of the bridge.
