background image

Pub. 42004-308G 

GAI-TRONICS 3030 KUTZTOWN RD.  READING, PA  19605 USA

 

610-777-1374  

  800-492-1212  

  Fax:  610-796-5954 

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

 

G A I - T R O N I C S ®  

A   H U B B E L L   C O M P A N Y  

Model 234WM-202 

Wall-Mount Stanchion Assembly 

Confidentiality Notice 

This manual is provided solely as an installation, operation, and maintenance guide, which contains 
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.  GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and 
such information may only be used in connection with the operation of your GAI-Tronics product or 
system.  This manual may not be disclosed in any form; in whole or in part, directly or indirectly, to any 
third party. 

General Information 

The Model 234WM-202 Wall-Mount Stanchion Assembly is part of a completely integrated emergency 
communications station and is designed to house a GAI-Tronics Model 39

x

 or 27

x

 Series Flush-Mount 

Telephone and a Model 540-001or 531A Strobe (each sold separately).  The stanchion is a simple, 
attractive, yet highly visible unit measuring 40.5 inches (1.03 meters) tall. 

GAI-Tronics enhanced emergency telephones are designed for isolated high-risk areas requiring 
emergency communications equipment.  Emergency telephone users simply press the clearly labeled 
emergency push button for immediate connection to a user-programmed central security telephone 
number. 

The strobe creates added visibility to emergency telephone locations by providing a constant-on lamp that 
automatically flashes when the emergency button is pressed.  The telephone is also highly visible; a light 
mounted in the stanchion shines on the front of the telephone to illuminate the telephone for nighttime 
use. 

The Model 234WM-202 Wall-Mount Stanchion Assembly consists of the Model 84505-202 Wall-Mount 
Stanchion and the Model 84503-30

x

 Panel Light Assembly (each packaged separately).  The strobe and 

the emergency telephone are purchased and packaged separately. 

Содержание 234WM-202













Отзывы: